The SLIM-PIR-LUNA motion detector received a distinction in the
Dobry Design 2020 competition in the "Modern technologies" category.
SLIM-PIR-LUNA
PIR motion detector with lighting feature
SLIM-PIR-LUNA detects motion in the protected area. Additionally, the detector has a set of LEDs to implement the lighting feature.
- certificate of compliance with the EN 50131 requirements for Grade 2
- motion detection using passive infrared (PIR) sensor
- adjustable sensitivity of detection
- digital motion detection algorithm
- digital temperature compensation
- option to enable/disable the creep zone protection
- wide-angle lens, designed specifically for SLIM LINE detectors
- option to replace the wide-angle lens with the curtain (CT-CL2) or long-range (LR-CL2) one
- ability to configure detector operating parameters using the OPT-1 keyfob
- built-in end-of-line resistors (2EOL: 2 x 1,1 kΩ / 2 x 4,7 kΩ / 2 x 5,6 kΩ)
- lighting feature implemented with white LEDs
- remote lighting control or motion activated lighting capability
- LED indicator
- selectable color of the LED indicator (7 colors available)
- LED indicator remote enable/disable
- remote switching between two levels of PIR sensor sensitivity
- configuration mode remote enable/disable
- supervision of motion detection and supply voltage circuit
- tamper protection against opening of enclosure and removal from mounting
- adjustable mounting holder (BRACKET D) included
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
indoor_detector_int.pdf
Certificates
Technical Data
Supply voltage
12 V DC
Detected target velocity
0.3...3 m/s
Operating temperature range
-10°C...+55°C
Recommended mounting height
2.4 m
Standby mode current consumption
13 mA
Max. current consumption
97 mA
Weight
142 g
Maximum humidity
93±3%
Dimensions
62 x 137 x 42 mm
Environmental class according to EN50130-5
II
Alarm signaling time
2 s
Complied with standards
EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5
EOL resistors
2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ
Warm-up period
30 s
Security grade according to EN50131-2-2
Grade 2
Detection area
20 m x 24 m, 90° (montaż na 2,4 m)
Alarm outputs (NC relay, resistive load)
40 mA / 24 V DC
Tamper outputs (NC relay, resistive load)
40 mA / 24 V DC
Relay contact resistance (alarm output)
26 Ω
Permissible installation height
up to 4 m
Relay contact resistance (tamper output)
26 Ω