knx-bin24_en.pdf
KNX-BIN24
Universal binary input module
KNX-BIN24 is a universal module of KNX binary inputs that enables electrical (voltage) signals to be converted into control telegrams for other devices on the bus. These signals may be generated by conventional ON/OFF buttons (to operate lighting, etc.) or by potential-free contacts of devices such as reed switches or sensors of various types of physical quantities.
The module has 8 physical inputs which allow it to handle 8 independent signals ranging from 0 to 30 V DC and AC.
Features:
- communication with the KNX bus via integrated bus connector
- definable channel polarity (NO / NC)
- configurable time of short / long button press
- virtual channels for receiving 1-bit telegrams from other KNX bus devices
- virtual logic channels for creating logical links between module channels
- virtual timer channels for creating time links
- possibility to define 20 function blocks that perform one of the available functions:
- switch / value transmitter
- edge response
- dimmer
- shutter controller
- switching sequence
- counter
- scene controller
- possibility to control each function block using any channel
- control of several function blocks using one channel
- control of lighting and shutters using 1 or 2 buttons (channels)
- ability to call a scene from any channel by using 8-bit commands
- manual operation of physical channels status by using buttons on the enclosure
- LEDs to indicate status of physical channels
- module configuration using ETS program
- suitable for mounting on DIN rail (35 mm)
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Software
Certificates
Technical Data
Number of inputs (zones)
8
Enclosure dimensions
70 x 92 x 60 mm
Operating temperature range
0°C...+45°C
Weight
144 g
IP code
IP20
Maximum tightening torque
0,5 N·m
Temperature range for storage / transport
-25°C...+70°C
Number of units on DIN rail
4
Certificate of conformity
nr 324/13957//17
Maximum cross-section of wire
2.5 mm²
Current draw from KNX bus
< 15 mA
Maximum time of response to telegram
< 20 ms
Maximum number of communication objects
108
Maximum number of group addresses
256
Maximum number of associations
256
Supply voltage (KNX bus)
20…30 V DC
Input current Iₙ
1,5 mA
Acceptable voltage range Uₙ
0…30 V AC/DC
Voltage range for Uₙ₀ signal
0…4 V AC/DC
Voltage range for Uₙ₁ signal
9…30 V AC/DC