ARF-200

Radio signal strength tester

The ARF-200 tester allows you to check the strength of radio signal received and transmitted by ABAX 2 system wireless devices. It also allows you to check the radio noise level in the frequency band used by ABAX 2 devices. As the noise test does not require the tester to be registered with the ABAX 2 system, it can be performed on the premises where a wireless system is yet to be installed.

  • ability to check the radio signal strength in location where the ABAX 2 device is installed
  • two operating modes to check the strength of signal:
    • received by the tester from the controller
    • received by the controller from the tester
  • ability to check the radio noise level in all 4 channels of the ABAX 2 system
  • LED indicator of radio signal strength
  • LED indicators of the operating mode
  • built-in piezoelectric transducer for audible signal
  • built-in non-replaceable battery
  • battery status indicator
ARF-200
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.

Documentation

general information manual
updated: 2022-11-17
420 KB
quick user guide
updated: 2020-10-29
559 KB

Certificates

EU declaration of conformity
updated: 2024-01-02
779 KB

Technical Data

Operating temperature range
0°C…+55°C
Max. current consumption
23 mA
Weight
104 g
Operating frequency band
868,0 ÷ 868,6 MHz
Dimensions
68 x 194 x 32 mm
Maximum battery charging current
2 A
USB voltage
5 V DC
USB connector type
micro USB typu B
Rechargeable battery (lithium polymer)
3,7 V / 600 mAh
Standby current consumption (tester OFF)
100 µA
Maximum current consumption from USB
250 mA

Information materials

1catalogue

2leaflet - end user

3leaflet - installer

4technical data

5product data sheet